6 Best Methods To Wire A Pedalboard

Wondering how to set up the first pedalboard you just bought? Well, we understand your excitement and it is time that you know about the methods of wiring your pedalboard. Pedalboards come in numerous shapes and sizes and there is a vast range of methods to wire it.

It is quite normal to feel limited with those tones coming out from your amp and now you are up for a unique experience. TourGearDesigns has accumulated the best methods to wire your first ever pedalboard and rest assured this process is quite an easy one once you understand the processes.

Top 6 DIY methods to wire your pedalboard

Here a list that includes the best six pedalboard wiring practices which will let you set up your pedalboard in no time.

• Cleaning and vacuuming

The primary step involves cleaning the entire board and getting rid of dust. Take a wiper or cloth and gently remove the dust particles from the surface. Now take out the pedalboard patch cables and clean them carefully. The aim is to make sure that there exists no dust inside the pedalboard goods. To clear off the hidden dust, dirt, and loose fabric pieces, it is recommended to use a vacuum cleaner. Lastly, remove all the pedals and wipe the board again for a complete finish.

• Adding Velcro

Now that you have successfully cleaned the new pedalboard, it is time to add the Velcro. Unpack the new Velcro and add it to the backside of each pedal of the pedalboard. In simple words, you are adding Velcro and placing pedals individually. You will find Guitar Pedalboard Cables and flat patch cables along with the package of your pedalboard. Remember that all the cables and adapters that came with the package will get connected at the back of the pedalboard.

• Tieing in the 9V power cables

Those 9V power cables need to be attached to your pedalboard after you have completed the addition of the Velcro process. You need to attach the guitar pedalboard cables and Flat Patch Cables at the back of your pedalboard along with the other pedalboard patch cables. You can minimize the wire lengths by folding them in as you require. You can also use Velcro or tapes to keep the wires attached to the pedalboard.

• Tieing in the wah pedal adapter

You are almost in the midway of the process. After you have successfully attached the pedalboard wires to the backside of the pedalboard, it is time to tie in the wah pedal adapter to the pedalboard. After you have attached the pedal adapter, you can use the Velcro or tapes to tie up the wires together to maintain a low profile.

• Tieing in pedals along with other adapters

Your pedalboard might come with a built-in surge protector and in that case, you do not have to add one. If you do not have a surge protector with your pedalboard, it is recommended that you buy one to prevent any damage in the future. Attach the surge protector wires with the board at the backside and secure it using a Velcro. Make sure you check out all the wires and add Velcro wherever necessary.

• Cabling up the remaining pedals

It is recommended to have wires of different lengths so that you have no confusion while setting up the pedalboard. TourGearDesigns recommends shorter cables in this case. If you need any extra Velcro, you are free to go ahead and add some extra Velcro for holding the cables together. You are almost done with your new pedalboard. Go ahead and enjoy the finished product.

This article sums up the best methods to wire your pedalboard. Make sure you follow the above-mentioned steps and you will see that wiring a pedalboard is an easy task. All you need to do is plug your wires properly and keep no loose ends. Embrace the new sound coming out from your pedalboard.